2010-2015 Camaro V8 Performance Pac
- Fits 2010-2015 Camaro SS & 1LE V8 (Coupe & Convertible w/Manual or Auto Trans)
- SLP Performance Pac includes the following:
- SLP LoudMouth I Axle-Back Low-Restriction Exhaust w/4” tips
- SLP Blackwing High-Performance Cold Air Intake w/Dry Filter (blue in color)
- SCT X4 Handheld Flash Device w/SLP Performance Pac Tune
- SLP’s Blackwing high-flow cold air intake provides superior air flow and ultimate performance over restrictive stock airbox
- Cold air intake system includes high-flow, high-capacity, washable blue air filter (does NOT require oiling)
- LoudMouth I 3” Exhaust (w/ 4” tips) provides extremely low restriction, maximum performance, and maximum sound
- Custom SLP calibration provides more aggressive throttle response and overall greater performance
- Calibration to be uploaded using included SCT X4 Handheld Flash Device
- Performance Gains:
- Increases engine performance by 48 RWHP at 4600 RPM and 55 ft lbs RWTQ at 4600 RPM (LS3 Engine)
- Increases peak engine horsepower from stock 426HP to over 450HP (LS3 Engine)
- Increases peak engine torque from stock 420 ft lbs to over 453 ft lbs (LS3 Engine)
- Installation is made easy with all included hardware and instructions
- Part #620066
SLP’s new Performance Pac for the 2010-2015 V8 Camaro is available for SS and 1LE V8 trims (coupe or convertible/manual & auto transmission). The Performance Pac consists of our Camaro V8 Blackwing Cold Air Induction Package, LoudMouth I 3” Axle-Back Exhaust System (w/4” tips), and an SCT X4 Handheld Flash Device and Cable to upload SLP’s custom Performance Pac Calibration. The end result of installing this SLP Performance Pac is an increase in engine performance of 48HP to the rear wheels at 4600 RPM, and 55 lb-ft of torque to the rear wheels at 4600 RPM (on an LS3 engine). Peak engine horsepower is also increased from 426HP (stock) to over 450HP, and peak torque horsepower soars from 420 stock to over 453 lb-ft!
- The Blackwing Cold Air Induction Package replaces the restrictive, power-robbing factory intake system and provides the ultimate in airflow performance. It is CAD-designed for optimized hood sealing to keep heat out and away from the high-flow high-capacity washable and reusable blue air filter (no oiling required). EPDM rubber couplers are utilized for proper fitment under engine load, rocking, and twisting. This cold air kit provides additional induction noise and an aggressive rumble. Installation is quick and easy, with all hardware and instructions needed for a bolt-on application in less than an hour. The cold air kit utilizes all factory holes and mounting points.
- Also included in the Performance Pac is a LoudMouth I Axle-Back 3” Exhaust System w/4” Tips. The straight-thru design of this axle-back system drastically reduces backpressure, resulting in enhanced power and a beastly tone. The system is built from mandrel-bent 3-inch stainless steel tubing with unbeatable flow characteristics, and finished off with 4-inch dual-wall polished tips. This exhaust system weighs significantly less than the OEM assembly, and installs in under an hour. Included with it are pre-welded hangers, detailed instructions, and all necessary installation hardware. This exhaust system is covered by SLP’s Limited Lifetime Warranty.
- Last, but not least, an SCT X4 Handheld Flash Device and Cable rounds out this Performance Pac. This is the portion that allows you to upload SLP’s custom Performance Pac Calibration, which fully integrates induction and exhaust system hardware, and allows for a more aggressive throttle response. The included SCT device makes for an easy finish to your Power Pac installation!
Note: Not available for sale or installation in the state of California.
- 2010, 2011, 2012, 2013, 2014, 2015 Chevrolet Camaro SS (Coupe & Convertible; Manual & Automatic Transmissions)